Simply connect the CANsmart™ Controller to your KTM diagnostic port to access over 35 programmable accessory settings designed to control auxiliary lights, turn signals, horns, brake lights, or any accessory you can imagine.
Control OEM accessories, 3rd party accessories or use the included wiring harnesses for plug & play connection to DENALI driving lights, DRLs, SoundBomb Horns and B6 Brake Lights.
Dimming, strobe, modulate, and "cancel with turn signal" are just a few of the settings available for LED auxiliary lights and DRLs.
Connect a high power SoundBomb™ horn without the need for a relay, and set your auxiliary lights to strobe when you sound your horn.
The intelligent brake light circuit enables multiple flash pattern braking and deceleration activated "smart brake" technology.
When set to accessory mode you can power a phone charger, GPS or heated gear to name a few. Each output provides up to 25 peak amps (10 amps continuous).
For increased customization while riding add our plug-n-play dimmer switch to independently dim two sets of lights without having to connect to the software.
MSRP: $30 (sold separately)
Our free Accessory Manager Software lets you set each of the four circuits to control what ever accessory type you want. Once selected, you can choose between dozens of features and settings to customize each accessory type to match your riding style. You can also set each circuits electronic fuses which, if tripped, will automatically reset with a cycle of the ignition.
Launched October 2020!
Our KTM CANsmart™ now has the same features and functionality as the famous "KTM Dongle". The new features include:
- Access locked ABS & MTC (traction control) modes
- Unlock ABS OFF and ABS OFF ROAD Mode for Adventure Models
- Unlock ABS OFF and ABS SUPERMOTO Mode for Duke Models
- Remember and retain ABS Mode on ignition cycles
*ABS OFF Mode turns off both front and rear ABS and MTC
*ABS OFF ROAD and ABS SUPERMOTO Modes turn off just the rear ABS and MTC
Set auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
On/OFF and Dim
Independently control two sets of lights on/off and intensity level (for both day and night) from our waterproof dimmer switch.
Set auxiliary lights to modulate during the day to increase your visibility to other motorists.
Flash to Pass
Need to get someones attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
Cancel With Turn Signal / Flash as Turn Signal
This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal. You can also set amber lights to flash as a turn signal.
Plug & Play Installation
Quickly and easily connect high power aftermarket horns like our SoundBomb™ without having to add an additional harness or relay.
Strobe with Horn
With this feature selected the CANsmart™ will automatically strobe your passing lamps or auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
Deceleration Activated "Smart Brake" Technology
The CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration before you even touch the bake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
Flash Pattern Braking
The CANsmart™ provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
Switched Power Source
The CANsmart™ provides a universal "accessory" option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
Delay Time Out
You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
On Board Power
This "accessory" circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.
In addition to the CANsmart™ controller, our kit includes four additional wiring harnesses that enable plug & play connection of two sets of auxiliary lights, SoundBomb™ horns and auxiliary brake lights.
The KTM CANsmart™ Controller is compatible with all 790 & 1290 Duke models, 790 adventure models, 1090 & 1190 Adventure models, and the 1290 Super Adventure models.