Excelente las luces !! Muy recomendada !!
BWI FAMILY OF BRANDS ▼
-
Udforsk
-
DENALI 101
- Nyheder
- Hvorfor vælge DENALI
- 2.0 Belysningsteknologi
- Strålemønstre
- Hvordan man sigter
- Produktcertificeringer
- Reservedele
- 2026 Katalog Download
-
Udstyrsguider
- ADV Moto Udstyrsguider
- Enduro Moto Udstyrsguide
- Street- og V-Twin-udstyrsguider
- Side-by-Side Udstyrsguider
- 4x4 Udstyrsguider
-
Forhandlere
- Om os
INDTAST KØRETØJ FOR AT TJEKKE PASFORM
D7 PRO Multi-Beam kørelys med modulært X-Lens system
-
Normalpris
-
$879.99 USD
-
Udsalgspris
-
$879.99 USD
-
Normalpris
-
$879.99 USD
-
Enhedspris
- pr.
- Normalpris
- $879.99 USD
- Udsalgspris
- $879.99 USD
- Normalpris
- $879.99 USD
- Enhedspris
- pr.
In Stock
Afsendes inden for 1-2 hverdageVælg din ledningsnet (valgfrit)
Vælg dine beslag (valgfrit)
Tilføj et par enkeltforlængerkabler (valgfrit)
To enkeltforlængerkabler (sælges separat fra CANsmart) er nødvendige til 3-kanals CanSmart-installationer af D7 Pro (Venstre DRL, Højre DRL og Symmetrisk spotlys).
Sæt: Kørelys Forlængerkabler, 54 tommer (par) $43.98
Your Selections:
D7 PRO Multi-Beam kørelys med modulært X-Lens system
Efter 2 års udvikling er vi begejstrede for at præsentere det højtydende og mest funktionsrige 4-tommer kørelys, der nogensinde er lanceret! Har du nogensinde spekuleret på, hvad 23.000 lumen gør ved et mørkt landskab? Det vil blæse dig bagover, og vi er slet ikke begyndt endnu.
Forestil dig det mest kraftfulde kørelys, der nogensinde er bygget, og tilføj derefter en flood-stråle, spot-stråle og hybridstråle, en multifarvet DRL-tilstand, to fuldt dæmpbare kredsløb og muligheden for at ændre stråleformen og strålefargen på farten. Det er D7 PRO, og det ser endnu bedre ud, end det lyder.
D7 PRO har et delt dobbeltkredsløbsdesign, der tillader fuldstændig uafhængig tænd/sluk og dæmpning af en central flood-stråle og en ydre spot-stråle. Brug vores revolutionerende DialDim Switch eller CANsmart Controller til ubesværet at styre alle lysfunktioner fra en enkelt halo-dæmperkontakt eller køretøjets originale styrekontroller.
Derudover har vi vores patenterede X-Lens system, som giver dig mulighed for at ændre den centrale flood- eller DRL-strålefarge til hvid, rav eller selektiv gul på farten, hvilket giver ryttere mere fleksibilitet og funktionalitet end nogensinde før.
Sidst men ikke mindst har D7 PRO en "DRL Boost Mode", som gør det muligt at køre de centrale optikker som en dæmpet DRL eller skrue op til 100 % for at skabe en højtydende flood-stråle. De innovative centrale optikker kan også blinke synkront med dine blinklys, når de kombineres med de ravfarvede X-Lenses.
D7 PRO Pod-funktioner
- HiDrive LEDS 11.900 lumen pr. pod - Syv 14-watt LED'er kombineret med vores proprietære TIR-optik gør dette til det kraftigste lys under 4,5” nogensinde lanceret
- Dobbeltstråle-teknologi - Uafhængig styring (og dæmpning) af central flood-stråle, ydre spot-stråle eller alt-på hybridstråle
- Modulært Snap-On X-Lens - Muliggør tilpasset stråleform og farve på farten. Udskiftelig central flood-strålefarge i hvid, rav eller selektiv gul
- DRL Boost Mode - Kør de centrale LED'er som en lavintensitets DRL, eller skru op for effekten for at generere en massiv højintensitets flood-stråle
- Integreret blinklys-tilstand - Kør de centrale flood-optikker som et ravfarvet DRL- eller flood-lys, der blinker synkront med køretøjets blinklys
- CANsmart & DialDim kompatibel - Styr begge kredsløb med en enkelt DialDim-kontakt eller lås op for over 20 funktioner og indstillinger med CANsmart tilbehørsstyring
D7 PRO specifikationer (enkelt pod)
- LED'er: (7x) 14 watt Cree XML3
- Strømforbrug: 98 watt / 8 ampere
- Rå lumen: 11.900
- Spot-stråleafstand: 1250 fod (380 meter)
- Flood-strålebredde: 250 fod (75 meter)
- DataDim™ kompatibel: Ja
- Driftsspænding: 9-32 VDC
- Pod-størrelse: 4,4" rund x 2,9" dyb
- Pod-vægt: 1,8 lbs
- IP68 & 69K vandtæt, nedsænkbar og højtryksrensning
- E-mærket godkendt spotlinse (ECE R112 kørelys)
D7 PRO lys-pod sæt (DNL.D7P.050.K) inkluderer:
- (2x) D7 PRO lys-pods (med monteringshardware)
- (6x) X-Lenses (2 klare, 2 ravfarvede og 2 selektivt gule)
- (2x) 2-til-1 enkeltkredsløbs ledningsadapter
D7 PRO produktpakker - Hvad er inkluderet?
D7 PRO DialDim pakke
- (1x) D7 PRO pods sæt (DNL.D7P.050.K)
- (1x) Universal DialDim lysstyring (DNL.WHS.20500)
D7 PRO CANsmart pakke
- (1x) D7 PRO pods sæt (DNL.D7P.050.K)
- (1x) CANsmart controller (køretøjsspecifik udgave)
*Produktpakker er kun til detailhandel og inkluderer individuelt pakkede varer.
Download af brugsanvisning
- Variant: Default Title
- Varenummer: DNL.D7P.050.K
- UPC :
- Vægt: 3.5 lb
- Produkttype: Kørelys
Questions & Answers
>
Customer Reviews
Customer Reviews
Overall rating: 4.8 / 5 from 66 reviews.
These lights completely transformed my night riding. The installation was simple, and the build quality is outstanding. After riding with them, it’s hard to believe how limited my visibility was before. An absolute must-have accessory. Kudos to the Denali team for such a great product. 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Excellent lights. Varied functionality and great illumination. Strobe function is great. Once you use it, trust me you won’t be able to ride with the OEM lights. They are damn bright. The only problem with these is that they will consume minimum 3 circuits of the can controller. For connecting any other accessory you will have to buy an another one.
These lights are incredible! High visibility during the day and unbelievable coverage at night! The representatives at Denali are top notch and make the experience personal when you reach out to them with questions or how to best set up your lights with your specific motorcyle. Denali, you hit it out of the park with the D7 Pro Multi Beam lights. Thank you and happy riding!
These lights are really great! I only wish the instructions had been more specific to the r1250rt. There are many videos for the GS, but not a single one for the r1250rt. On the other hand, when I called customer service, it was one of the top 5 customer ser ice experie ces I've ever experienced - and ill be 60 in a few days!
The Denali D7 Pro lights are a mandatory accessory for the 2025 Honda Goldwing 50th Anniversary since front lighting is woefully inadequate, as it is on most bikes. These lights combined with the DialDim Universal Fit controller live up to the claims you read on the internet. Once installed, the control knob is stylish and blends in well with the bike’s design and looks like it is meant to be there. It’s easy to use and lets you set light levels that fit your riding needs. Hopefully Denali will eventually make a dedicated plug and play controller for the 6th generation Goldwing as these lights are very popular for us Wing owners. Until then, if you want to use all the features you will need to remove plastic panels and run the Trigger Wire Harness up front to the FCU (Front Control Unit) to access the high-beam, rear turn signals, and ignition circuits. Horn is on a different circuit. Or you could just purchase an aftermarket lighting distribution hub that plugs in under the seat. Either way you will still need to remove the plastic panels to get to the high-beam and horn circuits. I did find the length of all supplied cables more than adequate for a large bike. Definitely an awesome product and a much-needed accessory for added safety and enjoyable riding, especially at night on poorly lit roads. I will be recommending these to my fellow riding buddies.
Lights are super bright and just what I need for night riding.
Best!!
Great looking and really bright light, but... BMW R1300GS riders be aware that to proper use the D7 Pros you need to use 3, yes 3, circuits from the CanSmart. If you use only 2 and run more than 70%, they will trip the main fuse and in order to get them to turn on you have to shut the bike off and restart. I finally got them to stay on by dialing down to 50% via the software on my laptop. The Denali support team is awesome and is very response with wiring recommendations and tips. Another option vice using 3 circuits is to purchase another CanSmart and piggyback them... I wish I had known this prior as I would have gone with a set of the D4s and D2s (which only require 2 circuits for both). My plan is to save up for the D4/D2 combo and sell the D7s on FB or elsewhere. First pic is the 1300GS with the D7 Pros, and the second is a F750GS with the D4s and D7.
Installed (myself) the Denali D7 Pro lights on my 2022 BMW K1600 GA. Hardest part of the install is becoming accustomed to which fasteners to remove to allow a clean wire run back to the Canbus Controller. The bracket that holds the D7 does require removal of many panels and the TFT display. You may have to contact Denali (who will pickup the phone and actually talk to you) for the most current installation pdf. A more complete video can be seen at this link (shows Denali install plus seperate dual color single array LED strips from Chromeglow). https://youtu.be/HL9yQFwc8Gg?si=EjkAJJELobmrnttw
Do recommend Denali D7’s. As mentioned in the review video they look absolutely stunning and I don’t doubt that drivers can see me at night. Day is a different story compared to before I installs them. Freeway filtering (California) is so much easier and safer.
These lights are SUPER bright!!! On my previous bike, I tried out some LED lights from Eagle Lights. These Denali Lights are ten times brighter than the lights from Eagle Lights. Granted, the are much more expensive, but it is worth it. When coupled with the CanSmart, these lights can do a lot. The lights bright/dim capabilities are programable via the software and the bikes integrated controls. You can program them to strobe when you activate the horn, when you press the hi-beams (3 times rapidly), you can turn them in to turn signals, you can modulate the lights and set the time of day when you want them to modulate. The install is plug-and-play, no splicing. It is a bit laborious. I had to take off the seats, the fuel tank, the back luggage rack, and the front fairing. But it was worth the effort. Tech support is very helpful. My only constructive feedback is I wish Denali would make a bracket to fit on the existing mount hole located on the engine guard for the 2024 HD Pan America. I do not like where Denali put the lights on the Pan America. I don't have a lot of confidence that the lights won't get damaged if I dropped the bike.
I love my new light set up! It has transformed the bike and extended my riding hours at both ends of the day. I would love for controller to allow more access to the functionality of Tenere’s turn signal system etc but that is a small issue!
D7 PRO Multi-Beam Driving Lights with Modular X-Lens System
Store owner replied: Glad to hear it Paul! If you can send us an email explaining what other Turn Signal functionality you wish the CANsmart had, I will make sure it gets into our Suggestion "Box." I assume you figured out how to make the Center 3 LEDs flash as Turn Signal, while still operating as a Driving Light? -Alex with Denali
Great product! Love the dual circuit capabilities like turn signals.
instructions were straightforward and easy to follow. Love how much they light up the world. still figuring out the CanSmart controller. I have inadvertently reset my odometer for both trip A and trip B trying to get the settings for the lights.
The lights are great, and installation was easy. My only gripe is the CanBus programming. My laptop is less than 5 years old, so it only has USB C inputs, and the port for the CanBus is an antiquated USB to Micro USB interface. I had to order an adapter so I can program the lights. It’s 2025, why isn’t there a Bluetooth connection to an IPhone App for this programming?
These lights are BRIGHT!! It was an all day project for me installing the lights. But I had never stripped all the plastic off my BMW F750 Gs, and I wanted the install to be clean. I also installed a pair of B6 brake lights, CANsmart, and a witeless charging /phone holder at the same time. The ease of making changes utilizing the CANsmart is great and the D7 Pro lights really light the way!
D7 PRO Multi-Beam Driving Lights with Modular X-Lens System
Store owner replied: Great video Ben, thanks for sharing! Pro Tip: if you ever want to take videos of your bike without the lights looking like they're flickering, you can turn them to full intensity (100%) and they'll appear as a solid light in the footage. It's the camera's frame rate that captures the dimmed lights as flickering. -Alex with Denali
Great lights and customer service
I run them on all my family’s bikes makes nighttime look like daytime
Intense day-light result. I f you need light, this is it. Yes, it’s expensive. It’s totally worth it.
Great lights. Easy to install. Flash to pass strobe feature is great. Cages know your there.
Love the driving lights mount and especially the D7 Pro and to match it with Soundbomb. Awesomeness!!!
.
Beautiful lights but a very steep price. I think their wiring is too long, plus if you add the Y adapter, even longer—a lot to get tied away. I have mine hooked to your CANsmart adapter and had issues with them tripping its internal breaker (when lights switched to bright). Default amps in the CANsmart was too low at 10 amps (should have been 20). Phone call to y’all had me squared right away.
I like it !!!
Great Product
I’ve had my D7 Pro’s on for a few months now and they continue to amaze me. I recently completed the Hoka Hey Motorcycle Challenge with them and they performed remarkably well, even through Hurricane Debby, which happened to be passing through Florida and Georgia right when we were starting the Hoka Hey. I was a favorite nighttime leader through the many backroads we travelled during the Challenge. Wildlife was easily visible, almost too much so! I firmly believe that the D7 Pro’s are life saving additions to my motorcycle.
D7 PRO Multi-Beam Driving Lights with Modular X-Lens System
Store owner replied: Hi Frank, Thanks for taking the time to write a review! We're glad to hear that you're loving the D7 Pros and appreciate your kind words.
D4, D7 Pro, B6 and Sound Bomb all connected. Have not adjusted the lights nor gone for a night ride as of yet
D7 PRO Multi-Beam Driving Light Pods with Modular X-Lens System
Very bright. Just what I was looking to add to my africa twin.
D7 PRO Multi-Beam Driving Light Pods with Modular X-Lens System
Love them! Was going to use them as turn signals, but decided to use them as a light pair so that I could run them at 30% during the day, 10% at night (turn signal doesn't have a night setting).
D7 PRO Multi-Beam Driving Light Pods with Modular X-Lens System
The positive: the D7Pro are stunning and has a significant road presence with not just its brightness(needless to say as it is top of the line) but also its innovation technology. The negative: Some troubleshooting for design team includes the loose rubber on the lens as well as proper D7 pro rubber covers instead of using the D7 ones. It does not fit well and for its price, you can do better.
D7 PRO Multi-Beam Driving Light Pods with Modular X-Lens System
Here are the lights in action
D7 PRO Multi-Beam Driving Light Pods with Modular X-Lens System
Fast delivery from US to Germany..
D7 PRO Multi-Beam Driving Light Pods with Modular X-Lens System
This is a preliminary review, based on upon 200 mi of night time use. These lights were installed mainly for highway commuting, in Eastern Oregon. First of all, the positives. The lights function extremely well, and are very, very bright. I am using them in a dual circuit configuration, with the center DRLs on with my low beam, and all LEDs on for high beam. So far, I have not been flashed by other drivers in this configuration. The lights are very good quality, and appear to be very durable. Now the negatives. One of the clear lenses was missing from one of the lights on delivery. The snap-on lenses were also missing several of the small silicone tabs, which hold them snug against the light. I alerted Denali, and they are sending replacements. I think the lens design could be improved upon, as they are slightly difficult to snap onto the lights at times. Given the price of the lights, I also think four extension wires should be included for proper installation. I was previously using a set of Morimoto HXB lights, and these Denalis are far superior.
D7 PRO Multi-Beam Driving Light Pods with Modular X-Lens System
Ordered daytime running lights through the Shop app....that was my first mistake. No ETA or shipping updates from Shop post 2 weeks from order date. I did finally receive an update via email from Denali but only after sending an inquiry concerning my order status and frustration from the Shop ghost. Learned that some parts from my order were 1-2 months back-ordered. Not acceptable given this was not disclosed at time of purchase. I mean, are we back in COVID era 2019-2020?? Since Denali's merger with VisionX Lighting & Brown & Watson International (BWI), there's been a notable decline. Remember, most of their lighting products cost $10–$15 to manufacture in China yet command $100+ retail in Western markets like ours. Someone's getting rich and it sure aint us.
D7 PRO Multi-Beam Driving Lights with Modular X-Lens System
Store owner replied: I'm very sorry about this. We did not realize that a Plug-In on the site was preventing the stock status from being shown for those Out of Stock Snap-On Lenses. We've submitted a ticket to get that corrected ASAP. Thank you for letting us know about it. Just so you know, our lights are manufactured at our factory in South Korea.
Not installed yet
I used the DataDim controller and it installed perfectly with the ignition connected to the 12v plug using a fuse tap. Your advertising and marketing of the product is very accurate the performance is stellar!
Perfect
This is the best place to order, fast, trusted, clear, transparent, and friendly
You'll ask yourself how you rode without them. Using the Dial Dim controller allows you to to fine tune the brightness to traffic conditions. Then, when the time allows, switch to high beam. At full power these are bright! Nearly as close to mid day sunshine as you could get. Turning them off reveals the wee tea candle you've been using as a headlight.
