In Stock
Afsendes inden for 1-2 hverdageStrømforsyningsadapter med kontakt - Udvalgte BMW Motorcykler
DENALI's omskiftelige strømforsyningsadapter tilsluttes din BMW's GPS-strømstik (på motorcykler med Nav-forberedelse) for at levere en CANbus-sikker, omskiftelig 12V strømkilde til at aktivere et relæ, der driver DENALI-lys, PowerHubs eller andre elektroniske tilbehør. Den forudinstallerede Posi-lock-stik betyder, at du ikke behøver at tappe, gennembore, klippe eller lodde nogen originale ledninger. BMW GPS-strømkilden er omskiftelig med tændingen, så den leverer strøm, når tændingen er tændt, og slukker, når tændingen er slukket. Bemærk venligst, at dette tilbehørskredsløb på de fleste BMW'er er designet med en forsinket slukning, så dine tilføjede tilbehør vil følge denne samme fabriksindstilling.
Installationsnote: DENALI omskiftelige strømforsyningsadapter er beregnet til at aktivere et relæ (sælges separat) og er ikke beregnet til direkte at forsyne et elektrisk tilbehør med strøm. Direkte strømforsyning til tilbehør fra denne adapter kan overbelaste kredsløbet og få CANbus til at afbryde strømmen til kredsløbet, indtil overbelastningen fjernes.
Overall rating: 4.8 / 5 from 13 reviews.
This adapter worked perfectly allowing me to easily connect auxiliary lights to the factory GPS power connector on my 2022 R1250 GSA. I connected the switched wire on my auxiliary lights wiring harness to the posi-tap connector in the Denali adapter (the main power leads from lights went directly to the battery). I contacted support for clarification before I placed the order and got a prompt and very helpful response.
Easy plug and play solution. No instructions came with device and I didn't know where to find the matching connector, but a msg to Denali was answered within 24 hours and they supplied a photo and suggestion on where to look. Done!
This little adapting harness works perfectly. Nice Work fellas!
Fully Expected A plus
Totally simplified the connection to the bike. Excellent.
Put a radar detector on my bike and needed a switched power supply Used the Denali switched power break out adapter ran the wire to a mini relay to give the detector a switched power from the battery so its still operating from the can bus
Good
Worked perfect! Didn’t have to cut any wires and even got an assist with the install location from your team.
The fit is perfect : the hard part is wiggling the bmw gps connector to loosen the connection in order to plug in the Denali plug
good so far
Plug and play - worked brilliantly as an ignition trigger for a PDM.
Does what it is supposed to do and easy to install.
It worked as it should.
