Σπίτι»Φωτισμός>Φώτα οδήγησης πολλαπλών δοκών D7 PRO με αρθρωτό σύστημα φακών X
Προσφορά
Φώτα οδήγησης πολλαπλών δοκών D7 PRO με αρθρωτό σύστημα φακών X
SKU: DNL.D7P.050.KUPC: 810005875233
Κανονική Τιμή
$747.99 USD
Τιμή προσφοράς
$747.99 USD
Κανονική Τιμή
$879.99 USD
Save $132.00
(15%)
Τιμή μονάδας
/ανά
Μόνο 677 απομένουν!
In Stock
Low stock (677)
Order Soon!
Αποστέλλεται εντός 1-2 εργάσιμων ημερών
Επιλέξτε το καλώδιο σύνδεσης σας (προαιρετικό)
Επιλέξτε τις βάσεις στήριξης (προαιρετικό)
Προσθέστε ένα ζευγάρι Μονών Επεκτατικών Καλωδίων (προαιρετικό)
Απαιτούνται δύο μεμονωμένα καλώδια επέκτασης (πωλούνται ξεχωριστά από το CANsmart) για εγκαταστάσεις 3 καναλιών CanSmart του D7 Pro (Αριστερό DRL, Δεξί DRL και Συμμετρική Δέσμη Spot).
Φώτα οδήγησης πολλαπλών δοκών D7 PRO με αρθρωτό σύστημα φακών X
Μετά από 2 χρόνια ανάπτυξης, είμαστε ενθουσιασμένοι να παρουσιάσουμε το πιο αποδοτικό και πλούσιο σε χαρακτηριστικά φως οδήγησης 4 ιντσών που έχει κυκλοφορήσει ποτέ! Έχετε αναρωτηθεί ποτέ τι κάνει 23.000 lumens σε ένα σκοτεινό τοπίο; Θα σας εντυπωσιάσει, και δεν έχουμε καν ξεκινήσει ακόμα.
Φανταστείτε το πιο ισχυρό φως οδήγησης που έχει κατασκευαστεί ποτέ, προσθέστε μια δέσμη flood, μια δέσμη spot και μια υβριδική δέσμη, μια πολύχρωμη λειτουργία DRL, δύο πλήρως ρυθμιζόμενους κυκλώματα και την επιλογή να αλλάζετε το σχήμα και το χρώμα της δέσμης εν κινήσει.Αυτό είναι το D7 PRO, και φαίνεται ακόμα καλύτερο από ό,τι ακούγεται.
Το D7 PRO διαθέτει σχεδιασμό με διπλό κύκλωμα που επιτρέπει πλήρως ανεξάρτητο άνοιγμα/κλείσιμο και ρύθμιση φωτεινότητας της κεντρικής δέσμης flood και της εξωτερικής δέσμης spot. Χρησιμοποιήστε τον επαναστατικό διακόπτη DialDim ή τον ελεγκτή CANsmart για να ελέγχετε εύκολα όλες τις λειτουργίες φωτισμού από έναν μόνο διακόπτη αμυδρής φωτεινότητας halo ή από τα χειριστήρια του οχήματος.
Προσθέστε σε αυτό το σύστημα X-Lens υπό πατέντα που σας επιτρέπει να αλλάζετε το χρώμα της κεντρικής δέσμης flood ή DRL σε λευκό, κεχριμπαρί ή επιλεκτικό κίτρινο εν κινήσει, δίνοντας στους αναβάτες περισσότερη ευελιξία και λειτουργικότητα από ποτέ.
Τέλος, το D7 PRO διαθέτει λειτουργία "DRL Boost Mode" που σας επιτρέπει να λειτουργείτε τα κεντρικά οπτικά ως αμυδρό DRL ή να αυξάνετε τη φωτεινότητα στο 100% για να δημιουργήσετε μια ισχυρή δέσμη flood. Τα καινοτόμα κεντρικά οπτικά μπορούν επίσης να αναβοσβήνουν συγχρονισμένα με τα φλας σας όταν συνδυάζονται με τους κεχριμπαρί X-Lenses.
Χαρακτηριστικά D7 PRO Pod
HiDrive LEDS 11.900 Lumens ανά Pod - Επτά LED 14 Watt σε συνδυασμό με τα αποκλειστικά οπτικά TIR μας κάνουν αυτό το φως το πιο φωτεινό κάτω από 4,5” που έχει κυκλοφορήσει ποτέ
Τεχνολογία Διπλής Δέσμης - Ανεξάρτητος έλεγχος (και ρύθμιση φωτεινότητας) της κεντρικής δέσμης flood, της εξωτερικής δέσμης spot ή της υβριδικής δέσμης με όλα ενεργοποιημένα
Ανταλλάξιμο Modular X-Lens - Επιτρέπει προσαρμογή σχήματος και χρώματος δέσμης εν κινήσει. Εναλλασσόμενο χρώμα κεντρικής δέσμης flood σε λευκό, κεχριμπαρί ή επιλεκτικό κίτρινο
Λειτουργία DRL Boost - Λειτουργήστε τα κεντρικά LED ως DRL χαμηλής έντασης ή αυξήστε την ισχύ για να δημιουργήσετε μια ισχυρή δέσμη flood υψηλής έντασης
Ενσωματωμένη Λειτουργία Φλας - Λειτουργήστε τα κεντρικά οπτικά flood ως κεχριμπαρί DRL ή φως flood που αναβοσβήνει συγχρονισμένα με τα φλας του οχήματος
Συμβατό με CANsmart & DialDim - Ελέγξτε και τα δύο κυκλώματα με έναν μόνο διακόπτη DialDim ή ξεκλειδώστε πάνω από 20 λειτουργίες και ρυθμίσεις χρησιμοποιώντας τον διαχειριστή αξεσουάρ CANsmart
Τεχνικά Χαρακτηριστικά D7 PRO (Μονό Pod)
LED: (7x) 14 Watt Cree XML3
Κατανάλωση Ισχύος: 98 Watt / 8 Ampere
Ακατέργαστα Lumens: 11.900
Απόσταση Δέσμης Spot: 1250 πόδια (380 μέτρα)
Πλάτος Δέσμης Flood: 250 πόδια (75 μέτρα)
Συμβατό με DataDim™: Ναι
Τάση Λειτουργίας: 9-32 VDC
Μέγεθος Pod: 4,4" στρογγυλό x 2,9" βάθος
Βάρος Pod: 1,8 lbs
Αδιάβροχο IP68 & 69K, βυθιζόμενο και ανθεκτικό σε υψηλής πίεσης ψεκασμό
Εγκεκριμένος Φακός Spot με σήμανση E (ECE R112 Driving Beam)
Σετ Φωτιστικών D7 PRO (DNL.D7P.050.K) περιλαμβάνει:
These lights completely transformed my night riding. The installation was simple, and the build quality is outstanding.
After riding with them, it’s hard to believe how limited my visibility was before.
An absolute must-have accessory.
Kudos to the Denali team for such a great product.
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Excellent lights. Varied functionality and great illumination. Strobe function is great. Once you use it, trust me you won’t be able to ride with the OEM lights. They are damn bright. The only problem with these is that they will consume minimum 3 circuits of the can controller. For connecting any other accessory you will have to buy an another one.
These lights are incredible! High visibility during the day and unbelievable coverage at night! The representatives at Denali are top notch and make the experience personal when you reach out to them with questions or how to best set up your lights with your specific motorcyle. Denali, you hit it out of the park with the D7 Pro Multi Beam lights. Thank you and happy riding!
These lights are really great! I only wish the instructions had been more specific to the r1250rt. There are many videos for the GS, but not a single one for the r1250rt. On the other hand, when I called customer service, it was one of the top 5 customer ser ice experie ces I've ever experienced - and ill be 60 in a few days!
The Denali D7 Pro lights are a mandatory accessory for the 2025 Honda Goldwing 50th Anniversary since front lighting is woefully inadequate, as it is on most bikes. These lights combined with the DialDim Universal Fit controller live up to the claims you read on the internet. Once installed, the control knob is stylish and blends in well with the bike’s design and looks like it is meant to be there. It’s easy to use and lets you set light levels that fit your riding needs.
Hopefully Denali will eventually make a dedicated plug and play controller for the 6th generation Goldwing as these lights are very popular for us Wing owners. Until then, if you want to use all the features you will need to remove plastic panels and run the Trigger Wire Harness up front to the FCU (Front Control Unit) to access the high-beam, rear turn signals, and ignition circuits. Horn is on a different circuit. Or you could just purchase an aftermarket lighting distribution hub that plugs in under the seat. Either way you will still need to remove the plastic panels to get to the high-beam and horn circuits. I did find the length of all supplied cables more than adequate for a large bike.
Definitely an awesome product and a much-needed accessory for added safety and enjoyable riding, especially at night on poorly lit roads. I will be recommending these to my fellow riding buddies.
Great looking and really bright light, but...
BMW R1300GS riders be aware that to proper use the D7 Pros you need to use 3, yes 3, circuits from the CanSmart. If you use only 2 and run more than 70%, they will trip the main fuse and in order to get them to turn on you have to shut the bike off and restart.
I finally got them to stay on by dialing down to 50% via the software on my laptop.
The Denali support team is awesome and is very response with wiring recommendations and tips.
Another option vice using 3 circuits is to purchase another CanSmart and piggyback them...
I wish I had known this prior as I would have gone with a set of the D4s and D2s (which only require 2 circuits for both).
My plan is to save up for the D4/D2 combo and sell the D7s on FB or elsewhere.
First pic is the 1300GS with the D7 Pros, and the second is a F750GS with the D4s and D7.
Installed (myself) the Denali D7 Pro lights on my 2022 BMW K1600 GA. Hardest part of the install is becoming accustomed to which fasteners to remove to allow a clean wire run back to the Canbus Controller.
The bracket that holds the D7 does require removal of many panels and the TFT display. You may have to contact Denali (who will pickup the phone and actually talk to you) for the most current installation pdf.
A more complete video can be seen at this link (shows Denali install plus seperate dual color single array LED strips from Chromeglow).
https://youtu.be/HL9yQFwc8Gg?si=EjkAJJELobmrnttw
Do recommend Denali D7’s. As mentioned in the review video they look absolutely stunning and I don’t doubt that drivers can see me at night. Day is a different story compared to before I installs them. Freeway filtering (California) is so much easier and safer.
These lights are SUPER bright!!! On my previous bike, I tried out some LED lights from Eagle Lights. These Denali Lights are ten times brighter than the lights from Eagle Lights. Granted, the are much more expensive, but it is worth it. When coupled with the CanSmart, these lights can do a lot. The lights bright/dim capabilities are programable via the software and the bikes integrated controls. You can program them to strobe when you activate the horn, when you press the hi-beams (3 times rapidly), you can turn them in to turn signals, you can modulate the lights and set the time of day when you want them to modulate. The install is plug-and-play, no splicing. It is a bit laborious. I had to take off the seats, the fuel tank, the back luggage rack, and the front fairing. But it was worth the effort. Tech support is very helpful. My only constructive feedback is I wish Denali would make a bracket to fit on the existing mount hole located on the engine guard for the 2024 HD Pan America. I do not like where Denali put the lights on the Pan America. I don't have a lot of confidence that the lights won't get damaged if I dropped the bike.
I love my new light set up!
It has transformed the bike and extended my riding hours at both ends of the day.
I would love for controller to allow more access to the functionality of Tenere’s turn signal system etc but that is a small issue!
Store owner replied:
Glad to hear it Paul! If you can send us an email explaining what other Turn Signal functionality you wish the CANsmart had, I will make sure it gets into our Suggestion "Box." I assume you figured out how to make the Center 3 LEDs flash as Turn Signal, while still operating as a Driving Light?
-Alex with Denali
Great product! Love the dual circuit capabilities like turn signals.
instructions were straightforward and easy to follow. Love how much they light up the world. still figuring out the CanSmart controller. I have inadvertently reset my odometer for both trip A and trip B trying to get the settings for the lights.
The lights are great, and installation was easy. My only gripe is the CanBus programming. My laptop is less than 5 years old, so it only has USB C inputs, and the port for the CanBus is an antiquated USB to Micro USB interface. I had to order an adapter so I can program the lights. It’s 2025, why isn’t there a Bluetooth connection to an IPhone App for this programming?
These lights are BRIGHT!! It was an all day project for me installing the lights. But I had never stripped all the plastic off my BMW F750 Gs, and I wanted the install to be clean. I also installed a pair of B6 brake lights, CANsmart, and a witeless charging /phone holder at the same time.
The ease of making changes utilizing the CANsmart is great and the D7 Pro lights really light the way!
Store owner replied:
Great video Ben, thanks for sharing! Pro Tip: if you ever want to take videos of your bike without the lights looking like they're flickering, you can turn them to full intensity (100%) and they'll appear as a solid light in the footage. It's the camera's frame rate that captures the dimmed lights as flickering. -Alex with Denali
Beautiful lights but a very steep price. I think their wiring is too long, plus if you add the Y adapter, even longer—a lot to get tied away.
I have mine hooked to your CANsmart adapter and had issues with them tripping its internal breaker (when lights switched to bright). Default amps in the CANsmart was too low at 10 amps (should have been 20). Phone call to y’all had me squared right away.
I’ve had my D7 Pro’s on for a few months now and they continue to amaze me. I recently completed the Hoka Hey Motorcycle Challenge with them and they performed remarkably well, even through Hurricane Debby, which happened to be passing through Florida and Georgia right when we were starting the Hoka Hey.
I was a favorite nighttime leader through the many backroads we travelled during the Challenge. Wildlife was easily visible, almost too much so!
I firmly believe that the D7 Pro’s are life saving additions to my motorcycle.
Store owner replied:
Hi Frank,
Thanks for taking the time to write a review!
We're glad to hear that you're loving the D7 Pros and appreciate your kind words.
D4, D7 Pro, B6 and Sound Bomb all connected. Have not adjusted the lights nor gone for a night ride as of yet
Love them! Was going to use them as turn signals, but decided to use them as a light pair so that I could run them at 30% during the day, 10% at night (turn signal doesn't have a night setting).
The positive: the D7Pro are stunning and has a significant road presence with not just its brightness(needless to say as it is top of the line) but also its innovation technology.
The negative: Some troubleshooting for design team includes the loose rubber on the lens as well as proper D7 pro rubber covers instead of using the D7 ones. It does not fit well and for its price, you can do better.
This is a preliminary review, based on upon 200 mi of night time use. These lights were installed mainly for highway commuting, in Eastern Oregon. First of all, the positives. The lights function extremely well, and are very, very bright. I am using them in a dual circuit configuration, with the center DRLs on with my low beam, and all LEDs on for high beam. So far, I have not been flashed by other drivers in this configuration. The lights are very good quality, and appear to be very durable. Now the negatives. One of the clear lenses was missing from one of the lights on delivery. The snap-on lenses were also missing several of the small silicone tabs, which hold them snug against the light. I alerted Denali, and they are sending replacements. I think the lens design could be improved upon, as they are slightly difficult to snap onto the lights at times. Given the price of the lights, I also think four extension wires should be included for proper installation. I was previously using a set of Morimoto HXB lights, and these Denalis are far superior.
Ordered daytime running lights through the Shop app....that was my first mistake. No ETA or shipping updates from Shop post 2 weeks from order date. I did finally receive an update via email from Denali but only after sending an inquiry concerning my order status and frustration from the Shop ghost. Learned that some parts from my order were 1-2 months back-ordered. Not acceptable given this was not disclosed at time of purchase. I mean, are we back in COVID era 2019-2020?? Since Denali's merger with VisionX Lighting & Brown & Watson International (BWI), there's been a notable decline. Remember, most of their lighting products cost $10–$15 to manufacture in China yet command $100+ retail in Western markets like ours. Someone's getting rich and it sure aint us.
Store owner replied:
I'm very sorry about this. We did not realize that a Plug-In on the site was preventing the stock status from being shown for those Out of Stock Snap-On Lenses. We've submitted a ticket to get that corrected ASAP. Thank you for letting us know about it.
Just so you know, our lights are manufactured at our factory in South Korea.
I used the DataDim controller and it installed perfectly with the ignition connected to the 12v plug using a fuse tap. Your advertising and marketing of the product is very accurate the performance is stellar!
You'll ask yourself how you rode without them. Using the Dial Dim controller allows you to to fine tune the brightness to traffic conditions. Then, when the time allows, switch to high beam. At full power these are bright! Nearly as close to mid day sunshine as you could get.
Turning them off reveals the wee tea candle you've been using as a headlight.