Love the products! Confidence is at a different level when riding at night, and in the city, you want to be seen, the lights do the job! I give them an A+ Costumer service is excellent Thank You!!
BWI FAMILY OF BRANDS ▼
적합성을 확인하려면 차량에 탑승하세요.
BMW R1200LC 및 R1250 시리즈용 CANsmart™ 컨트롤러
-
정가
-
$314.99 USD
-
판매가
-
$314.99 USD
-
정가
-
$314.99 USD
-
단가
- 당
- 정가
- $314.99 USD
- 판매가
- $314.99 USD
- 정가
- $314.99 USD
- 단가
- 당
In Stock
영업일 기준 1~2일 이내 배송됩니다ezSwitch Kit for CANsmart (optional)
Provides a built-in LED indicator and switch for controlling accessories
ezSwitch Kit for CANsmart Controllers $150.00
Your Selections:
BMW R1200LC 및 R1250 시리즈용 CANsmart™ 컨트롤러
BMW 오토바이의 CAN 버스 전기 시스템의 유연성과 지능을 활용하여 새로운 개선된 DENALI CANsmart™ Controller GEN II로 액세서리 설치를 획기적으로 쉽게 만드세요.
DENALI CANsmart™ Controller는 플러그 앤 플레이 설치와 최대 네 개의 액세서리를 통합 제어하여 BMW "WonderWheel" 또는 CANsmart™ 액세서리 매니저 소프트웨어에서 바로 제어할 수 있는 수십 가지 맞춤 설정을 가능하게 합니다.
CANsmart의 네 개 회로는 DENALI 2.0 라이트 두 세트, SoundBomb 경적, 그리고 B6 보조 브레이크 라이트를 독립적으로 연결하고 제어하도록 사전 프로그래밍되어 있습니다.
Gen II - 더 많은 기능, 더 강력한 성능, 더 다재다능함
Gen I CANsmart와 달리 Gen II의 모든 네 개 회로는 연속 10암페어의 전력을 제공할 수 있으며 각 회로는 모든 종류의 액세서리를 구동하도록 구성할 수 있습니다. 전체 장치의 최대 전력 소모는 연속 30암페어로 유지됩니다. Gen II는 또한 두 가지 새로운 보조 라이트 설정을 특징으로 합니다. 이제 보조 라이트를 조절하여 가시성을 높일 수 있으며, 좌우 측 라이트를 독립적으로 설정하여 해당 방향 지시등을 작동할 때 취소할 수 있습니다.
기능
- 하이/로우 동기화 - 공장 하이빔 스위치와 함께 프로그래밍 가능한 하이/로우 설정 사이를 전환하도록 보조 라이트를 설정합니다.
- ON/OFF 및 밝기 조절 - 두 세트의 라이트를 독립적으로 ON/OFF 제어하고 원래 차량 스위치에서 낮과 밤 모두 밝기 수준을 변경할 수 있습니다.
- 라이트 조절 - 보조 라이트를 조절하여 다른 운전자에게 가시성을 높입니다.
- 플래시 투 패스 - 누군가의 주의를 끌고 싶나요? 하이빔 스위치를 세 번 펄스하면 보조 라이트가 빠르게 세 번 스트로브됩니다.
- 방향 지시등과 함께 취소 - 이 기능은 방향 지시등을 켤 때 해당 보조 라이트를 취소하여 강력한 보조 라이트가 신호를 압도하지 않도록 합니다.
- 비상등과 반대 깜박임 - 이 기능은 비상등과 반대로 보조 라이트를 깜박여 도로변 비상 상황에서 가시성을 높입니다.
- 플러그 앤 플레이 경적 설치 - 추가 하네스나 릴레이 없이 SoundBomb™ 같은 고출력 애프터마켓 경적을 빠르고 쉽게 연결할 수 있습니다.
- 경적과 함께 스트로브 - 이 기능을 선택하면 CANsmart™ 소프트웨어가 경적을 울릴 때 자동으로 보조 라이트를 스트로브합니다. 공장 경적이나 SoundBomb™ 경적 모두 작동합니다.
- 감속 시 작동하는 "스마트 브레이크" 기술 - CANsmart™는 실시간으로 차량 속도를 읽어 브레이크를 밟기 전에 감속 시 보조 브레이크 라이트를 작동시킵니다. 민감도와 스마트 브레이크 기능이 작동할 최소 속도를 조절할 수 있습니다.
- 플래시 패턴 브레이킹 - CANsmart™는 네 가지 다른 플래시 패턴을 제공하여 매우 밝은 보조 브레이크 라이트가 뒤 차량 운전자에게 더욱 눈에 띄게 합니다. 보조 브레이크 라이트를 강한 제동 시에만 깜박이게 하거나, 브레이크 작동 중 계속 깜박이게 하거나, 네 번 빠르게 깜박인 후 지속 점등(캘리포니아 법적 깜박임 속도)으로 설정할 수 있습니다.
- 회로 기능 선택기 - CANsmart 소프트웨어의 회로 기능 선택기를 사용하면 네 개 회로 중 어느 회로에서든 원하는 액세서리를 구동할 수 있습니다. 회로 아이콘을 클릭하여 드롭다운 메뉴를 열고 사용 가능한 회로 기능 목록에서 선택하세요.
- 스위치 전원 공급 - CANsmart™는 "액세서리" 옵션을 제공하여 깨끗한 스위치 12V 전원을 제공합니다. 이 회로에 연결된 액세서리는 점화와 함께 켜지고 꺼집니다.
- 지연 시간 종료 - 이 회로의 액세서리는 지연 종료를 설정할 수 있어 오토바이를 끈 후 최대 30초 동안 전원이 유지됩니다.
- 온보드 전원 - "액세서리" 회로 옵션은 GPS, 전화기, 발열 장비 또는 기타 전자 장치를 전원 공급하는 데 이상적입니다.
박스 구성품
- CANsmart™ Controller
- (x2) 5.5ft 연장 분배기
- 5ft SoundBomb 경적 연장 케이블
- B6 브레이크 라이트 배선 어댑터
- 케이블 타이
- 접착식 후크 앤 루프 패스너
- 마이크로 USB 프로그래밍 케이블
소프트웨어
Windows 또는 Mac용 CANsmart 액세서리 매니저 소프트웨어를 다운로드하려면 여기를 클릭하세요
차량 적합성
- BMW R 1200 GS LC 2013-2018
- BMW R 1200 GS LC Adventure 2014-2018
- BMW R 1200 RS 2015-2018
- BMW R 1200 R 2015-2018
- BMW R 1200 RT 2014-2018
- BMW R 1250 GS 2019-2023
- BMW R 1250 GS Adventure 2019-2024
- BMW R 1250 RT 2019-2024
- BMW R 1250 RS 2020-2024
- BMW R 1250 R 2020-2024
다른 차량 제조사 및 모델용 CANsmart™ 컨트롤러를 보려면, 여기 클릭
사용 설명서 다운로드
- 변종: Default Title
- SKU: DNL.WHS.11602
- UPC :
- 무게: 1.27 lb
- 상품 유형: 액세서리 관리
Questions & Answers
>
Customer Reviews
Customer Reviews
Overall rating: 4.8 / 5 from 81 reviews.
fantastic product, my R1200GS 2013, feels like a different bike at night. people don't believe that it is 13 years old and even less now. I repeat a fantastic product. I recon you call Denali customer service direct and don't buy in stores, as I was recommended the wrong bus and had to buy again. The sales rep which advised me on the web chat did an excellent job.
CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series
Store owner replied: Thank you very much for the review! We're glad to help you bring your bike into this decade, in terms of lighting and conspicuity! -Alex with Denali
Great lights! Now I can see at night! Difficult install on this bike, but a great customer service experience when I called in!
Easy to install and easy to program.
CANsmart is a true Plug&Play device, downloaded the software & was able to configure all my devices, wiring was easy & plenty of space to store the device underneath the seat, used foam to suppress possible vibrations & 3M tape for the USB port - just in case
Saw how well this worked when I added it to my other bike so had to add it to the RT as well. Such an easy way to add accessories.
East install instructions need to be more specific. Plugs should be lettered or numbered for specific no mistake installation. Lots of comments on lights from other riders this past weekend ride Will be showing them off at Bikeweek this weekend in Daytona Beach. Rock solid mounting brackets add confidence to the look and steadfast zeroing of the hot spot beams on the road ahead with my super bright hi beams too. Outstanding product.
Just know, we all have questions in our endeavors, and the D team provides support and solutions off the chart. G2G
It’s still a work in progress! I can’t get the blinkers to work, but I will! I’m very satisfied with the product.
very easy to install love it
Purchased CANsmart with D4 and B6 lights. Everything packaged well and arrived in good condition. Installation and setup was very easy with various options for operation. Very well please with light output and Denali products.
Very easy to install love it
Fast delivery, easy install. Used with B6 dual brake lights programed to flash.
Very good product
Excelente!! Its great and powerfull, I am very happy with the new d7 pro
Installation is straight forward. Wires are too long for the application and should be cut to length for each application. Works as advertised. Caps for the lead ends that are not used are not provided. Did not see an option to purchase caps either maybe I missed it on the website.
I enjoy the Denali setup! I also enjoy the functionality of these lights. I have since (this video) added the T3s to the front and rear. The difference in riding at night is astounding! And the rear flashing brake lights get drivers attention as soon as they start flashing!! I get a LOT more space when I brake now! And the D7s are dipped toward the ground at 10% to not blind oncoming traffic. But at 100% (even angled down) they provide so much light that it’s like riding during the day.
Great product easy to install and setup
Not only that the install is simple and quick, the customer service is First Class! I want to make sure that my lights configurations set in a particular way. The two representatives that I’ve talked to were very knowledgeable and patient to assist! Made the whole experience AMAZING!
CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series
Store owner replied: Thanks for such a glowing review! I will pass on your kind words to our CS staff!
👍🤠🏍
I love the CanSMART controller. I have used one now both my F850GSA and now a new R1250GSA (photo and video attached). The installation is straightforward, easy to read and understand directions along with Denali/TT support staff; I’ve used both. I used the CanSMART to power B6 tail lights shown, but also D4 Aux lights and DRL’s as well. Lastly, you can find lots of YouTube videos of installations and all kinds of adventure bikes. I’ve used the software as well, but have always gone back to the default settings. Maybe the Sound Bomb is next….
🙏🏼
Love the Denali Cansmart, the B6 Brake light and the Soundbomb! I've also connected my Weiser Technic Turn Indicators Front and Rear to the CanSmart. To be able to plug in my computer and control all these elements is amazing. Also makes addition of components so easy and adds less fused connections to my already crowded battery compartment. Plus the support received from Jesse and the customer support team is unparalleled! You can really tell that they ride bikes and really care about the product and supporting customers. Thanks, Denali!
Quick delivery. Works as advertised
My Cansmart stopped working and the warranty exchange was an easy process thanks to Alex.
Great product My 3rd one Works amazing
The product is good but the customer service of Nick and Alex is absolutely amazing! They helped and supported me through all the process and I couldn’t be more grateful to them. Thank you
easy to follow, precise installation instructions and easy to alter programming
Great product, plug & play almost. Would highly recommend it to BMW GS owners.
Customer service was very helpful in helping me out. I installed the CANsmart Controller GEN II on my BMW 1200gs with no problems. I realy like the user interfase. I would recommend to anyone.
Very straight forward on installation, and easy to setup. Also your tech team staff are so helpful. Thanks again for your product and support, my lights work great, and have so many functions with the can smart.
Replaced my Gen I controller from 7 years ago on my 2018 BMW R1200RS… The Gen II is a little larger in length but everything else is the same. Easy installation and plug and play, as advertised. I use mine to control my D2 light pods and B6 brake light for visibility. A rider friend refers to my light pods as “landing lights”. I have no complaints with my Denali system and feel I have a lot more visibility than without. Would I recommend it, yes. Is it a bit pricey, yes. Does it make you more visible and illuminate more in front of you, absolutely!
It was easy to install minus having to find where the can bus connection would be. That's due to not having update pictures for the newer bike I have.
Only using the horn circuit for now. Sure beat getting to the horn, and finding room for the extra wiring and relay. Future expansion will be really easy.
everything ok - except one cable was broken - the male connector was copletely broken, so that i cannot use the cable
I have used Can Smart in my 2014 BMW R1200. Now with my 2024 GSA 1250. It still works great!
Easy to connect but didn't see instructions for the programming software. I may have missed it. But it would have been nice to see all the options.
Easy install, easy setup with software, very bright lights and loud horn!
The introduction of the EZ-CAN to my BMW r1250R has raised an issue. With only an accessory attached to the EZ-CAN, the BMW reports that the license plate light is not working. I moved to a different circuit and the error cleared, is now a sometimes error. I'm hoping that the error goes away, or becomes constant so it is easier to track down.
CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series
Store owner replied: Hey Steven, that's an odd issue! Please give us a call at +1 401-360-2550 so we can begin to troubleshoot this with you. Have you confirmed that the code disappears just by simply disconnecting the CANsmart? -Alex
Great product that I have changed because my last HexZcan was damage by mositure weather. It is more easy to configure in the laptop than Hex Ezcan
