집»액세서리 관리»캔스마트>트라이엄프 타이거 1200 및 900 시리즈용 CANsmart™ 컨트롤러
트라이엄프 타이거 1200 및 900 시리즈용 CANsmart™ 컨트롤러
SKU: DNL.WHS.24600UPC: 810005873970
정가
$314.99 USD
판매가
$314.99 USD
정가
$314.99 USD
단가
/당
오직 34 왼쪽!
In Stock
Low stock (34)
Order Soon!
영업일 기준 1~2일 이내 배송됩니다
ezSwitch Kit for CANsmart (optional)
Provides a built-in LED indicator and switch for controlling accessories
ezSwitch Kit for CANsmart Controllers $150.00
Your Selections:
트라이엄프 타이거 1200 및 900 시리즈용 CANsmart™ 컨트롤러
새롭고 향상된 DENALI CANsmart Controller GEN II로 오토바이의 CANbus 전기 시스템의 유연성과 지능을 활용하여 액세서리 설치를 획기적으로 쉽게 만드세요.
DENALI CANsmart Controller는 플러그 앤 플레이 설치와 최대 네 개의 액세서리를 통합 제어하여 손잡이 컨트롤이나 CANsmart Accessory Manager 소프트웨어에서 바로 제어할 수 있는 수십 가지 맞춤 설정을 제공합니다.
CANsmart의 네 개 회로는 DENALI 2.0 라이트 두 세트, SoundBomb 경적, 그리고 B6 보조 브레이크 라이트를 독립적으로 연결하고 제어하도록 사전 프로그래밍되어 있습니다.
특징
하이/로우 동기화- 공장 하이빔 스위치로 프로그래밍 가능한 하이/로우 설정 간에 보조 라이트를 전환하도록 설정합니다.
켜기/끄기 및 밝기 조절- 두 세트의 라이트를 독립적으로 켜고 끄며 (주간 및 야간 모두) 원래 차량 스위치에서 바로 밝기 수준을 변경할 수 있습니다.
라이트 변조- 보조 라이트를 변조하여 다른 운전자에게 가시성을 높이도록 설정합니다.
플래시 투 패스- 누군가의 주의를 끌어야 하나요? 하이빔 스위치를 세 번 펄스하면 보조 라이트가 빠르게 세 번 스트로브됩니다.
턴 시그널로 취소- 이 기능은 턴 시그널을 켤 때 해당 보조 라이트를 취소하여 강력한 보조 라이트가 신호를 압도하지 않도록 합니다.
비상등과 반대 깜박임 - 이 기능은 비상등과 반대로 보조 라이트를 깜박여 도로변 비상 상황에서 가시성을 높입니다.
플러그 앤 플레이 경적 설치- 추가 하네스나 릴레이 없이 SoundBomb 같은 고출력 애프터마켓 경적을 빠르고 쉽게 연결할 수 있습니다.
경적과 함께 스트로브- 이 기능을 선택하면 CANsmart 소프트웨어가 경적을 울릴 때 자동으로 보조 라이트를 스트로브합니다. 공장 경적이나 SoundBomb 경적 모두 작동합니다.
감속 시 작동하는 "스마트 브레이크" 기술- CANsmart는 차량 속도를 실시간으로 읽어 브레이크를 밟기 전에 감속 시 보조 브레이크 라이트를 작동시킵니다. 민감도와 스마트 브레이크 기능이 작동할 최소 속도를 조절할 수 있습니다.
플래시 패턴 브레이킹- CANsmart™는 네 가지 다른 플래시 패턴을 제공하여 매우 밝은 보조 브레이크 라이트가 뒤 차량 운전자에게 더 잘 보이도록 합니다. 보조 브레이크 라이트를 강한 제동 시에만 깜박이게 하거나, 브레이크가 작동하는 동안 계속 깜박이게 하거나, 네 번 빠르게 깜박인 후 고정(캘리포니아 합법 플래시 속도)하도록 설정할 수 있습니다.
회로 기능 선택기 - CANsmart 소프트웨어의 회로 기능 선택기를 사용하면 네 개 회로 중 어느 회로에서든 원하는 액세서리를 실행할 수 있습니다. 회로 아이콘을 클릭하여 드롭다운 메뉴를 열고 사용 가능한 회로 기능 목록에서 선택하세요.
스위치 전원 공급- CANsmart™는 깨끗한 스위치 12V 전원을 제공하는 범용 "액세서리" 옵션을 제공합니다. 이 회로에 연결된 액세서리는 점화와 함께 켜지고 꺼집니다.
지연 시간 종료- 이 회로의 액세서리를 지연 종료하도록 설정할 수도 있습니다. 이 경우 오토바이를 끈 후 최대 30초 동안 전원이 유지됩니다.
온보드 전원- "액세서리" 회로 옵션은 GPS, 휴대폰, 발열 장비 또는 기타 전자 장치를 전원 공급하는 데 이상적입니다.
박스 구성품
CANsmart Controller
(x2) 5.5ft 라이트 연장 케이블
5ft SoundBomb 경적 연장 케이블
B6 브레이크 라이트 배선 어댑터
CAN 버스 연결 분배 케이블
케이블 타이
접착식 후크 앤 루프 패스너
마이크로 USB 프로그래밍 케이블
소프트웨어
CANsmart Accessory Manager 소프트웨어를 다운로드하려면 여기를 클릭하세요
Excellent product. Plug and play with full programability. I have already noticed that I am much more visible on the road with my Tiger 900 GT. If you are considering this product, think no more just buy it. You will not be dissatisfied. Ride on !!
I've been a long time customer of Denali products and this is my first experience with a CANsmart Controller. Like all of Denali products, the installation was super easy and clean. I have D3 Spots paired on one channel and D3 Fogs on separate circuits to match with the turn signals. The final channel is dedicated to the B6 stop lights. Configuration was intuitive and easy.
The BIGGEST hurdle to this CANsmart controller install was the CANsmart Accessory Manager app. After the download, this app would not load on my Microsoft Surface (Windows 11) laptop. It wasn't until I used the Windows 10 Compatibility Mode that the CANsmart app finally loaded and I was able to connect and control the CANsmart controller. I have no clue as to why.
Otherwise, I installed the CANsmart controller on my Tiger 900 RP to "grow into". Currently I connected my GPS device to the CANsmart, primarily to provide a switched power source, and I'm looking forward to adding D7 Pro Multibeam pods and rear T3-S smart tail lights.
Made install a breeze!!
I didn't know that I needed it at the time I placed my order.
I've been a bagger rider for 40 + years. My Triumph tiger is a big change for me and the Denali team is making it easy for this old dog to learn a new trick!!
Thanks for all the great advice!!
Stupid simple install on my '23 900 GT. So far I have a set of S4's, and a B6 hooked up. All work as indicated. Love the dim up/down on the S4's. Dont have a computer to do fine tuning on the unit, but its really not needed as Denali has the defaults right where I'd want them. Next to install is the Soundbomb horn and that should do it.
Feels really well made. Wires feel well protected and are potted as they exit the body of the device. Install was easy, except for finding room for all the wires. Easy enough to program, though I thought I'd have ability to set timer to allow bike to run a bit before supplying voltage. Not able to do that for my GPS.