Denali 2.0 Light Kits are brighter, more robust, and a lot more versatile. The all new Cree High-Intensity 10 watt LED's are focused through our TriOptic™ Lens System to give you three unique beam patterns in one kit. Equipped with DataDim™ Technology and a modular HotSwap™ wiring harness, the lights can be upgraded in seconds to switch between half and full intensity with your vehicle's original high beam switch. Our DrySeal™ submersible waterproof construction and Impact PC™ Bezels create super durable light and switch housings that can withstand the most extreme environments without giving up.
HiDrive™ Hi Intensity LEDs
2.0 lights feature the latest development from Cree; a new "Hi-Intensity" LED chip that features a redesigned primary optic to maximize light output through secondary optics. The "HI" series LEDs are more efficient; producing 20% more light output (lumens) without increasing power draw.
TriOptic™ Multi-Beam Lens System
2.0 light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds.
All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source. Plug in our DataDim™ Controller (sold separately) to enable the DENALI lights to switch between half and full intensity with your vehicle's original high beam switch.
DataDim eliminates unreliable modulation of the entire circuit, something that is unavoidable using basic two-wire dimming.
HotSwap™ Modular Harness
Our premium wiring harness features high-quality waterproof components and our clever HotSwap™ design which enables an effortless swap from the standard single-intensity relay to our dual-intensity DataDim™ Controller (sold separately).
DrySeal™ Waterproof Construction
In addition to molded silicone gasket seals, we use a unique Dry-Seal™ construction technique that encases the wires in a potted cavity as they enter the housing. This ensures our housings are 100% watertight even when submerged underwater with thewires cut and connector removed. Our DrySeal™ construction isalso used in the new 2.0 illuminated switch.
Impact PC™ Corrosion-Proof Bezels
Our Impact PC™ bezels are molded in 100% polycarbonate to create an impenetrable surface that won't rust, fade, or corrode, even after taking repeated impacts from rocks and debris. That is simply not possible with traditional coated aluminum.
LiveActive™ Intelligent Thermal Management
LEDs last longer and put out more light when they are kept cool. 2.0 lights feature cutting edge LED drivers that work with our uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that our lights stay cool enough to maintain the maximum light output when you need it most.
Previously white, the 2.0 optic holders are plated in bright chrome. This subtle attention to detail maximizes reflectivity and refines the appearance of the lamps to match the original chrome reflectors of your vehicle's headlights.
Low-Profile Mounts - Stainless Steel Hardware
2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile mounting hinge creates a super clean installation while maintaining maximum strength.
With Modular Handlebar Switch Mount
Our beefy, lighted, submersible waterproof switch was engineered from the ground up to withstand harsh outdoor abuse on powersports vehicles. Its clever design can be either flush or bar mounted and the 7/8" and 1" mounts are included in all 2.0 light kits.
E-Mark Certified Lenses
Included in all 2.0 Light Kits
In addition to providing three beam options in one kit, the second set of included lenses carry an offcial E-Mark certification. This ensures you can stay street-legal on-road while maintaining the option for maximum distance off-road.
Plug-n-play Connection to Select CANbus Vehicles
Designed for 2.0 lights, the CANsmart™ Controller communicates directly with your vehicle's CANbus electrical system to enable effortless installation and integrated dimming of 2 sets of DENALI 2.0 lights, a SoundBomb Horn, and our B6 brake light.
Amber Lens Kits
Now Available for all 2.0 Lights
Our trademarked TriOptic™ lens system is also available in amber for added daytime visibility and fog-cutting performance. The kits include a set of amber spot lenses as well as a set of amber flood lenses so you can create each of the three beam options in amber.
DENALI is the only brand that can provide a complete lighting and visibility package that includes the lights, light mounts, horn, horn mount, auxiliary brake light, and a single intelligent plug-n-play controller to provide effortless installation and integrated control of all your accessories.