SoundBomb™ ミニ電磁低音ホーン

SKU: TT-SB.10200.B UPC: 810005870023

通常価格
$40.99 USD
セールスプライス
$40.99 USD
通常価格
$40.99 USD
単価
当たり 

のみ 1420 左!

In Stock

1~2営業日以内に発送します

プラグアンドプレイハーネスを追加(オプション)

SoundBomb ホーン用ユニバーサル ワイヤリング ハーネス - 5.5 フィート
SoundBomb ホーン用ユニバーサル ワイヤリング ハーネス - 5.5 フィート $39.99

BMWホーン配線アダプターを追加(オプション)

配線アダプター - SoundBomb から BMW OEM ハーネスへ
配線アダプター - SoundBomb から BMW OEM ハーネスへ $21.99

Your Selections:

SoundBomb™ ミニ電磁低音ホーン

113デシベルの音量で、DENALI SoundBomb Mini モーターサイクルホーンの独特な低音は、一般的な100デシベルのディスクホーンの2倍の大きさです。工場出荷時のホーンからの直接のプラグ&プレイアップグレードとして設計されており、元のホーンがブレードスタイルの電気接続を持ち、5アンペアの負荷に対応できる限り、追加のリレーや配線ハーネスは不要です。純正品では物足りない場合は、SoundBomb Miniで存在感を示しましょう。

一部のオートバイのホーン回路は、この5アンペアのホーンに電力を供給できません。ホーン回路の最大アンペア数が5アンペア未満の場合、または不明な場合は、プラグ&プレイハーネスを追加してホーン回路をバイパスし、バッテリーから直接電力を供給してください。また、標準リレーも追加してください。これはホーンハーネスには含まれていません。

製品仕様

  • 3フィートで113デシベル
  • 動作電圧:12ボルト(11.7ボルト必要)
  • 消費電力:5アンペア
  • 一体型デザイン
  • 寸法:約3.25" x 3.4" x 2.5"
  • スタイリッシュなオールブラックデザイン
  • ほとんどの純正ホーン位置に適合

キット内容

  • 一体型電磁ホーン
  • 取り付け用ハードウェア
  • 完全イラスト入り取り付け説明書

適合に関する注意事項:

  1. BMWオートバイへのプラグ&プレイ取り付けには、BMW配線アダプター(DNL.WHS.10100)を追加してください。
  2. 元のホーンにブレードスタイルの電気接続がない場合は、元のホーンコネクターを取り外し、Soundbomb Miniに接続するためにメスのスパードコネクターに交換する必要があります。
  3. このホーンはKTM 1190および1290オートバイには対応していません。
  4. BMW配線アダプター(DNL.WHS.10100)を使用しない場合は、CANsmartコントローラーまたはプラグ&プレイリレーハーネスが取り付けに必要です(別売)
  5. ホーンのスパードコネクターの位置は製品写真や取り付け説明書と異なる場合があります

 

取扱説明書

Questions & Answers

>

Customer Reviews

Customer Reviews

Overall rating: 4.6 / 5 from 142 reviews.

Customer video review of SoundBomb™ Mini Electromagnetic Low Tone Horn

Mini Sound Bomb fitted after adding crash bars. Limited space but used original mounting with some bends so no contact with frame, exhaust or crash bars. The original Triumph horn on a ‘16 Bonneville is anemic at best, this is plenty loud enough to get cagers off their phones/pay attention. Happy customer! And yes, my exhaust is filthy; don’t judge, wash day is tomorrow.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer photo review of SoundBomb™ Mini Electromagnetic Low Tone Horn

I originally ordered the Soundbomb Denali and I could't find anywhere to mount it on my 22' KTM 890R. I didn't like the option for the split system either. That is when I discovered that a Soundbomb Mini would fit and deliver the truck like sound I wanted on my bike. Too many drivers looking at their phones at stop lights. This new horn definitely gets their attention now! As for the Denali? It's going on my truck.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer video review of SoundBomb™ Mini Electromagnetic Low Tone Horn

Good & loud sounding horn compared to OEM. Install was easy with purchase of coupler (sold separately). Very satisfied to have loud horn whenever necessary!

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer video review of SoundBomb™ Mini Electromagnetic Low Tone Horn

I was able to mount the sound bomb mini on the same bracket as my original BMW Hon. And I’m able to use both horns. It was fairly easy to install and I’m very happy with the Denali products.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer photo review of SoundBomb™ Mini Electromagnetic Low Tone Horn

With the crash bar on my FXST, it's possible to reuse the stock bracket but you'll have to relocate it more in front. It's easy but take a bit of experiment. Don't thank me for the trick, it's 10 dollars... Super sound and it get attention when it's needed.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer photo review of SoundBomb™ Mini Electromagnetic Low Tone Horn

Installed on a 2023 Triumph 900 Tiger GT. On this bike, you cannot use the bracket (not enough room under the nose). How to: - Remove bike upper front fender (nose). 4 * 5mm hex. - Bend connectors on Sound Bomb 90 degrees back - Remove old squeaker - Connect Sound Bomb Mini, let it hang. - Test (should be loud) - Remove rubber grommet on bike holding bracket - Keep black washer and nut, throw away the rest. - Slice grommet in half - Place it on Sound Bomb thread, insert in bracket - Add washer on the other side of bracket - Tighten so Sound Bomb pavilion is facing front - Pavilion should be 15 degrees left facing forward - Test (should be loud) - Reinstall the nose - Test (should be loud) I hope this helps; it works very well. I tested the suspension clearance; you'd still have over 1/2 inch even if you bottom out the fork.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer photo review of SoundBomb™ Mini Electromagnetic Low Tone Horn

The stock horn on my bike was pretty weak sounding, so I talked with denali about an upgrade. Bam sound bomb mini was the right choice for me and worked out great, installed it in 15 minutes and sound perfect. Really appreciate the customer service with Denali and fantastic products.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer photo review of SoundBomb™ Mini Electromagnetic Low Tone Horn

I like this horn - it is a lot louder, uses the existing 7 amp OEM horn circuit, and was pretty easy to install on my 2023 Z900RS Cafe. It was also pretty inexpensive. Happy Camper!

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer video review of SoundBomb™ Mini Electromagnetic Low Tone Horn

The horn is great and works perfectly with stock wiring on my 2023 Tenere 700. I do wish it was a bit smaller as I think I may have some issues with it getting caught on things off road.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer photo review of SoundBomb™ Mini Electromagnetic Low Tone Horn

I ordered Soundbomb mini horns for 2 of my motorcycles. One is supported, the other is not. Not supported is a BMW F650 motorcycle with a weak electrical system for the horn. Since it's currently under repair, that's what I installed it on first. I built a new 1.5 mm2 wire from the battery through the swing fuse to the horn. The horn is switched by a 12 V relay on the new electrical circuit. I connected the relay to the wires of the factory horn. In this way, the horn receives the necessary power for its proper operation. He has a very strong voice, everyone will hear it.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer photo review of SoundBomb™ Mini Electromagnetic Low Tone Horn

I have this Horne on all three of my bike, Aprilia Tuareg 660, Concours 1400 and Victory Cross Country . Great product. It gets people’s attention, way better than the pathetic OEM horn.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer photo review of SoundBomb™ Mini Electromagnetic Low Tone Horn

Replaced the stock horn on my 2019 Triumph Tiger 1200 XCa. Wanted to install the Sound Bomb like I have on my Kawasaki Concours 1400, but could not find a suitable mounting location. The Sound Bomb Mini was a direct replacement. Mounted in the same location with the existing wiring. No relays to mount or wires to run. The tone is much lower and the overall sound is much louder, making this far superior over the stock horn.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer video review of SoundBomb™ Mini Electromagnetic Low Tone Horn

This is probably my third or fourth purchase of the Denali Soundbomb Mini. I put it on all my bikes knowing it sounds more authoritative than the "meep meep" of stock horns. I choose the Soundbomb Mini because it usually fits in the stock location with stock wiring. Truly plug and play.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Customer photo review of SoundBomb™ Mini Electromagnetic Low Tone Horn

Bought for my '21 Harley Sport Glide, love it! But now won't fit with engine guard installed. If you make a horn with the same sound as the soundbomb but same size as stock disc style i would buy it in a heartbeat.

SoundBomb™ Mini Electromagnetic Low Tone Horn

This horn 100% will not work out of the box on a Triumph Tiger 1200 XRx. The horn’s power tabs are 90 degrees in the wrong direction. Pointing straight into the triple clamp headstock. The horn is also about 3x The thickness of the original factory horn. Making it a hazard for shock, travel, and fender interactions. I am disappointed that the site said that this would work in a 2018 1200 XRx. And I get that I could make it work. With doing adjustments and things like that, but I wanted this out of the box solution that I was told. You can make it work. You would have to bend the tabs risking breaking the solution, and you would have to splice in new wiring to make the wires longer for your original OEM wiring. This is to enable to horn to point downwards as they instruct you to do. I wired the device up without attaching it just to hear the sound. And I must say it’s a disappointing sound. It is loud, but it sounds like somebody startled a trumpet player.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Remind me of the Fiamm horns I used to get years ago, which is a good thing. They are compact and light and loud enough for me. Fairly easy to install since they were replacing a set of larger horns. I bought 2, one for each side of the bike.

SoundBomb™ Mini Electromagnetic Low Tone Horn

Have used Soundbomb Mini on multiple motorbikes. Latest install is a Can-Am Spyder RTL. Fits perfectly, sound is amazing. A "Must Have" upgrade at an affordable price. Highly Recommended!

SoundBomb™ Mini Electromagnetic Low Tone Horn

This is my third Denali Mini Sound Bomb. This latest is for my most recent motorbike purchase. Definitely a “must have” horn because the OEM horns on motorbikes are terrible.

SoundBomb™ Mini Electromagnetic Low Tone Horn

We loved that it was very simple to install, and it sounds like a car horn, not the factory installed moped horn! This was a very good upgrade for our Triumph Speedmasters. Thank you Denali!

SoundBomb™ Mini Electromagnetic Low Tone Horn

I put this on a 24 Harley Fat boy, even tho it says it does not fit, it went right on, it does sit out a inch or two but clears everything, the horn itself does not have an air horn sound like the other sound bomb, but is like 3-4 times louder than the beep beep stock horn, great purchase & have ordered another already

SoundBomb™ Mini Electromagnetic Low Tone Horn