CANsmart™ 控制器,适用于宝马 R1200LC 和 R1250 系列

SKU: DNL.WHS.11602 UPC: 810005872300

正常价格
$314.99 USD
售价
$314.99 USD
正常价格
$314.99 USD
单价
每 

仅剩900!

In Stock

1-2 个工作日内发货

ezSwitch Kit for CANsmart (optional)

Provides a built-in LED indicator and switch for controlling accessories

ezSwitch Kit for CANsmart Controllers
ezSwitch Kit for CANsmart Controllers $150.00

Your Selections:

CANsmart™ 控制器,适用于宝马 R1200LC 和 R1250 系列

利用您的BMW摩托车CAN总线电气系统的灵活性和智能性,通过全新升级的DENALI CANsmart™ 控制器第二代,使配件安装变得极为简便。

DENALI CANsmart™ 控制器提供即插即用安装和最多四个配件的集成控制,支持数十种可定制设置,可直接通过BMW的“WonderWheel”或CANsmart™配件管理软件进行控制。

CANsmart的四个电路预设连接并独立控制两组DENALI 2.0灯、SoundBomb喇叭和我们的B6辅助刹车灯。


第二代 - 更多功能,更强动力,更加多样化

与第一代CANsmart不同,第二代的所有四个电路均可提供持续10安培的全功率,每个电路可配置运行任何类型的配件。整机最大持续功率仍为30安培。第二代还新增了两种辅助灯设置。您现在可以调节辅助灯以增强可见性,并设置左右侧灯在激活相应转向灯时独立取消。

功能

  • 高/低同步 - 通过原厂远光灯开关设置辅助灯在可编程的高/低档之间切换。
  • 开/关及调光 - 独立控制两组灯的开/关及亮度(白天和夜晚均可),直接通过原车开关操作。
  • 调制灯光 - 设置辅助灯调制闪烁,提高您对其他驾驶者的可见度。
  • 闪光示意 - 需要引起注意?快速按三次远光灯开关,辅助灯将快速闪烁三次。
  • 转向信号取消 - 激活转向信号时,自动关闭对应的辅助灯,防止强光盖过转向信号。
  • 危险警告灯反向闪烁 - 辅助灯与危险警告灯反向闪烁,提高路边紧急情况的可见性。
  • 即插即用喇叭安装 - 快速轻松连接高功率后装喇叭,如SoundBomb™,无需额外线束或继电器。
  • 喇叭联动闪烁 - 选择此功能时,按喇叭时辅助灯自动闪烁。无论使用原厂喇叭还是SoundBomb™均适用。
  • 减速激活“智能刹车”技术 - CANsmart™实时读取车速,在减速时自动激活辅助刹车灯,甚至在您踩刹车前。可调节灵敏度和最低激活速度。
  • 刹车闪烁模式 - 提供四种不同闪烁模式,使超亮辅助刹车灯更易被后方车辆注意。可设置仅在急刹时闪烁、持续闪烁或快速闪烁四次后保持常亮(符合加州法规闪烁频率)。
  • 电路功能选择器 - CANsmart软件中的电路功能选择器允许您在四个电路中任意运行所选配件。点击电路图标打开下拉菜单,从可用功能列表中选择。
  • 开关电源 - CANsmart™提供通用“配件”选项,提供干净的12V开关电源。连接此电路的配件随点火开关开关。
  • 延时关闭 - 可设置此电路上的配件延时关闭,车辆熄火后最多保持30秒供电。
  • 车载电源 - “配件”电路选项非常适合为GPS、手机、加热装备或其他电子设备供电。

包装清单

  • CANsmart™ 控制器
  • (x2) 5.5英尺延长分线器
  • 5英尺SoundBomb喇叭延长线
  • B6刹车灯接线适配器
  • 扎带
  • 粘扣带
  • Micro USB编程线

软件

点击这里 下载Windows或Mac版CANsmart配件管理软件

    适用车型

    • BMW R 1200 GS LC 2013-2018
    • BMW R 1200 GS LC Adventure 2014-2018
    • BMW R 1200 RS 2015-2018
    • BMW R 1200 R 2015-2018
    • BMW R 1200 RT 2014-2018
    • BMW R 1250 GS 2019-2023
    • BMW R 1250 GS Adventure 2019-2024
    • BMW R 1250 RT 2019-2024
    • BMW R 1250 RS 2020-2024
    • BMW R 1250 R 2020-2024

    查看其他车型的CANsmart™控制器,点击 这里


    说明书下载

      • 变体: Default Title
      • 存货单位: DNL.WHS.11602
      • UPC : 810005872300
      • 重量: 1.27 lb
      • 产品类型: 配件管理

      Questions & Answers

      >

      Customer Reviews

      Customer Reviews

      Overall rating: 4.8 / 5 from 81 reviews.

      Customer video review of CANsmart™ Controller for BMW R1200LC & R1250 Series

      Love the products! Confidence is at a different level when riding at night, and in the city, you want to be seen, the lights do the job! I give them an A+ Costumer service is excellent Thank You!!

      CANsmart™ Controller for BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      fantastic product, my R1200GS 2013, feels like a different bike at night. people don't believe that it is 13 years old and even less now. I repeat a fantastic product. I recon you call Denali customer service direct and don't buy in stores, as I was recommended the wrong bus and had to buy again. The sales rep which advised me on the web chat did an excellent job.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Store owner replied: Thank you very much for the review! We're glad to help you bring your bike into this decade, in terms of lighting and conspicuity! -Alex with Denali

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      CANsmart is a true Plug&Play device, downloaded the software & was able to configure all my devices, wiring was easy & plenty of space to store the device underneath the seat, used foam to suppress possible vibrations & 3M tape for the USB port - just in case

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      East install instructions need to be more specific. Plugs should be lettered or numbered for specific no mistake installation. Lots of comments on lights from other riders this past weekend ride Will be showing them off at Bikeweek this weekend in Daytona Beach. Rock solid mounting brackets add confidence to the look and steadfast zeroing of the hot spot beams on the road ahead with my super bright hi beams too. Outstanding product.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Purchased CANsmart with D4 and B6 lights. Everything packaged well and arrived in good condition. Installation and setup was very easy with various options for operation. Very well please with light output and Denali products.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Installation is straight forward. Wires are too long for the application and should be cut to length for each application. Works as advertised. Caps for the lead ends that are not used are not provided. Did not see an option to purchase caps either maybe I missed it on the website.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer video review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      I enjoy the Denali setup! I also enjoy the functionality of these lights. I have since (this video) added the T3s to the front and rear. The difference in riding at night is astounding! And the rear flashing brake lights get drivers attention as soon as they start flashing!! I get a LOT more space when I brake now! And the D7s are dipped toward the ground at 10% to not blind oncoming traffic. But at 100% (even angled down) they provide so much light that it’s like riding during the day.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Not only that the install is simple and quick, the customer service is First Class! I want to make sure that my lights configurations set in a particular way. The two representatives that I’ve talked to were very knowledgeable and patient to assist! Made the whole experience AMAZING!

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Store owner replied: Thanks for such a glowing review! I will pass on your kind words to our CS staff!

      Customer video review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      I love the CanSMART controller. I have used one now both my F850GSA and now a new R1250GSA (photo and video attached). The installation is straightforward, easy to read and understand directions along with Denali/TT support staff; I’ve used both. I used the CanSMART to power B6 tail lights shown, but also D4 Aux lights and DRL’s as well. Lastly, you can find lots of YouTube videos of installations and all kinds of adventure bikes. I’ve used the software as well, but have always gone back to the default settings. Maybe the Sound Bomb is next….

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Love the Denali Cansmart, the B6 Brake light and the Soundbomb! I've also connected my Weiser Technic Turn Indicators Front and Rear to the CanSmart. To be able to plug in my computer and control all these elements is amazing. Also makes addition of components so easy and adds less fused connections to my already crowded battery compartment. Plus the support received from Jesse and the customer support team is unparalleled! You can really tell that they ride bikes and really care about the product and supporting customers. Thanks, Denali!

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      The product is good but the customer service of Nick and Alex is absolutely amazing! They helped and supported me through all the process and I couldn’t be more grateful to them. Thank you

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Very straight forward on installation, and easy to setup. Also your tech team staff are so helpful. Thanks again for your product and support, my lights work great, and have so many functions with the can smart.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Replaced my Gen I controller from 7 years ago on my 2018 BMW R1200RS… The Gen II is a little larger in length but everything else is the same. Easy installation and plug and play, as advertised. I use mine to control my D2 light pods and B6 brake light for visibility. A rider friend refers to my light pods as “landing lights”. I have no complaints with my Denali system and feel I have a lot more visibility than without. Would I recommend it, yes. Is it a bit pricey, yes. Does it make you more visible and illuminate more in front of you, absolutely!

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      The introduction of the EZ-CAN to my BMW r1250R has raised an issue. With only an accessory attached to the EZ-CAN, the BMW reports that the license plate light is not working. I moved to a different circuit and the error cleared, is now a sometimes error. I'm hoping that the error goes away, or becomes constant so it is easier to track down.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Store owner replied: Hey Steven, that's an odd issue! Please give us a call at +1 401-360-2550 so we can begin to troubleshoot this with you. Have you confirmed that the code disappears just by simply disconnecting the CANsmart? -Alex