CANsmart™ 控制器,适用于 Triumph Tiger 1200 和 900 系列

SKU: DNL.WHS.24600 UPC: 810005873970

正常价格
$314.99 USD
售价
$314.99 USD
正常价格
$314.99 USD
单价
每 

仅剩34!

In Stock

1-2 个工作日内发货

ezSwitch Kit for CANsmart (optional)

Provides a built-in LED indicator and switch for controlling accessories

ezSwitch Kit for CANsmart Controllers
ezSwitch Kit for CANsmart Controllers $150.00

Your Selections:

CANsmart™ 控制器,适用于 Triumph Tiger 1200 和 900 系列

利用您的摩托车CANbus电气系统的灵活性和智能性,使配件安装变得极其简单,采用全新升级的DENALI CANsmart控制器第二代。

DENALI CANsmart控制器提供即插即用安装和最多四个配件的集成控制,支持数十种可自定义设置,可直接通过您的手控或CANsmart配件管理软件进行控制。

CANsmart的四个电路预设连接并独立控制两组DENALI 2.0灯、SoundBomb喇叭和我们的B6辅助刹车灯。

功能

  • 高/低同步 - 通过原厂远光灯开关设置辅助灯在可编程的高/低档之间切换。
  • 开/关和调光 - 独立控制两组灯的开/关及亮度(白天和夜晚均可)直接通过您的原车开关操作。
  • 灯光调制 - 设置辅助灯调制以提高您对其他驾驶者的可见性。
  • 闪光示意 - 需要引起注意?快速按三次远光灯开关,辅助灯将快速闪烁三次。
  • 转向灯取消 - 当您打开转向灯时,此功能会取消对应的辅助灯,防止强光辅助灯盖过转向信号。
  • 危险灯反向闪烁 - 此功能使辅助灯与危险灯反向闪烁,提高路边紧急情况的可见性。
  • 即插即用喇叭安装 - 快速轻松连接高功率后装喇叭,如我们的SoundBomb,无需额外线束或继电器。
  • 喇叭闪烁 - 选择此功能时,CANsmart软件将在您按喇叭时自动使辅助灯闪烁。无论您安装的是原厂喇叭还是SoundBomb喇叭,此功能均有效。
  • 减速激活“智能刹车”技术 - CANsmart实时读取车速,在您踩刹车前减速时激活辅助刹车灯。您可以调节灵敏度和智能刹车功能激活的最低速度。
  • 刹车闪光模式 - CANsmart™提供四种不同的闪光模式,使我们的超亮辅助刹车灯更易被后方车辆注意。您可以设置辅助刹车灯仅在急刹时闪烁,持续闪烁,或快速闪烁四次后保持常亮(符合加州合法闪烁频率)。
  • 电路功能选择器 - CANsmart软件中的电路功能选择器允许您在四个电路中任意运行所选配件。点击电路图标打开下拉菜单,从可用功能列表中选择。
  • 开关电源 - CANsmart™提供通用“配件”选项,提供干净的开关12V电源。连接到此电路的任何配件将随点火开关开关而开关。
  • 延时关闭 - 您还可以设置此电路上的配件延时关闭,关闭车辆后最多保持供电30秒。
  • 车载电源 - “配件”电路选项非常适合为GPS、手机、加热装备或其他电子设备供电。

包装内含

  • CANsmart控制器
  • (x2) 5.5英尺灯光延长线
  • 5英尺SoundBomb喇叭延长线
  • B6刹车灯接线适配器
  • CAN总线连接分线器线缆
  • 扎带
  • 粘扣带
  • Micro USB编程线

软件

点击 这里 下载CANsmart配件管理软件

    适用车型

    • Triumph Tiger 1200 GT                    (2022 - 2023)
    • Triumph Tiger 1200 GT PRO            (2022 - 2023)
    • Triumph Tiger 1200 GT Explorer      (2022 - 2023)
    • Triumph Tiger 900 GT                      (2020 - 2023)
    • Triumph Tiger 900 GT LOW             (2020 - 2023)
    • Triumph Tiger 900 GT PRO              (2020 - 2023)
    • Triumph Tiger 900 RALLY                 (2020 - 2023)
    • Triumph Tiger 900 RALLY PRO         (2020 - 2023)


    说明书下载

     

    *Tiger 900 限制说明:

    由于Tiger 900原厂线束的差异,适用以下限制:

    • 辅助灯1和辅助灯2电路无昼夜亮度区分,因此无白天调制功能。
    • 刹车灯功能要求KILL开关处于运行位置。
    • 变体: Default Title
    • 存货单位: DNL.WHS.24600
    • UPC : 810005873970
    • 重量: 1.27 lb
    • 产品类型: 配件管理

    Questions & Answers

    >

    Customer Reviews

    Customer Reviews

    Overall rating: 4.8 / 5 from 16 reviews.

    Customer video review of CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    Excellent product. Plug and play with full programability. I have already noticed that I am much more visible on the road with my Tiger 900 GT. If you are considering this product, think no more just buy it. You will not be dissatisfied. Ride on !!

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    Customer photo review of CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    I've been a long time customer of Denali products and this is my first experience with a CANsmart Controller. Like all of Denali products, the installation was super easy and clean. I have D3 Spots paired on one channel and D3 Fogs on separate circuits to match with the turn signals. The final channel is dedicated to the B6 stop lights. Configuration was intuitive and easy.

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    The BIGGEST hurdle to this CANsmart controller install was the CANsmart Accessory Manager app. After the download, this app would not load on my Microsoft Surface (Windows 11) laptop. It wasn't until I used the Windows 10 Compatibility Mode that the CANsmart app finally loaded and I was able to connect and control the CANsmart controller. I have no clue as to why. Otherwise, I installed the CANsmart controller on my Tiger 900 RP to "grow into". Currently I connected my GPS device to the CANsmart, primarily to provide a switched power source, and I'm looking forward to adding D7 Pro Multibeam pods and rear T3-S smart tail lights.

    CANsmart™ Controller for Triumph Tiger 1200 and 900 Series

    Made install a breeze!! I didn't know that I needed it at the time I placed my order. I've been a bagger rider for 40 + years. My Triumph tiger is a big change for me and the Denali team is making it easy for this old dog to learn a new trick!! Thanks for all the great advice!!

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    Stupid simple install on my '23 900 GT. So far I have a set of S4's, and a B6 hooked up. All work as indicated. Love the dim up/down on the S4's. Dont have a computer to do fine tuning on the unit, but its really not needed as Denali has the defaults right where I'd want them. Next to install is the Soundbomb horn and that should do it.

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    Feels really well made. Wires feel well protected and are potted as they exit the body of the device. Install was easy, except for finding room for all the wires. Easy enough to program, though I thought I'd have ability to set timer to allow bike to run a bit before supplying voltage. Not able to do that for my GPS.

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series