In Stock
1-2个工作日内发货开关电源适配器 - 部分 BMW 摩托车
DENALI 开关电源适配器连接到您的 BMW 的 GPS 电源连接器（在配备导航准备的自行车上），以提供 CANbus 安全的开关 12V 电源，用于触发继电器为 DENALI 灯、PowerHub 或其他电子配件供电。预装的 Posi-lock 连接器意味着您无需敲击、刺穿、切割或焊接任何原始电线。 BMW GPS 电源随点火开关一起切换，因此当您打开点火开关时它将供电，当您关闭点火开关时它将关闭。请注意，大多数 BMW 上的此配件电路都设计有延迟关闭时间，因此您添加的配件将反映相同的出厂设置。
安装注意事项：DENALI 开关电源适配器旨在触发继电器（单独出售），而不是直接为电气配件供电。直接从此适配器为附件供电可能会使电路过载，并触发 CANbus 切断电路电源，直到过载消除。
Overall rating: 4.8 / 5 from 13 reviews.
This adapter worked perfectly allowing me to easily connect auxiliary lights to the factory GPS power connector on my 2022 R1250 GSA. I connected the switched wire on my auxiliary lights wiring harness to the posi-tap connector in the Denali adapter (the main power leads from lights went directly to the battery). I contacted support for clarification before I placed the order and got a prompt and very helpful response.
Easy plug and play solution. No instructions came with device and I didn't know where to find the matching connector, but a msg to Denali was answered within 24 hours and they supplied a photo and suggestion on where to look. Done!
This little adapting harness works perfectly. Nice Work fellas!
Fully Expected A plus
Totally simplified the connection to the bike. Excellent.
Put a radar detector on my bike and needed a switched power supply Used the Denali switched power break out adapter ran the wire to a mini relay to give the detector a switched power from the battery so its still operating from the can bus
Good
Worked perfect! Didn’t have to cut any wires and even got an assist with the install location from your team.
The fit is perfect : the hard part is wiggling the bmw gps connector to loosen the connection in order to plug in the Denali plug
good so far
Plug and play - worked brilliantly as an ignition trigger for a PDM.
Does what it is supposed to do and easy to install.
It worked as it should.
