CANsmart™ 控制器,適用於 Triumph Tiger 1200 和 900 系列

SKU: DNL.WHS.24600 UPC: 810005873970

正常價格
$314.99 USD
銷售價格
$314.99 USD
正常價格
$314.99 USD
單價
每 

僅剩34 !

In Stock

於 1–2 個工作天內出貨

ezSwitch Kit for CANsmart (optional)

Provides a built-in LED indicator and switch for controlling accessories

ezSwitch Kit for CANsmart Controllers
ezSwitch Kit for CANsmart Controllers $150.00

Your Selections:

CANsmart™ 控制器,適用於 Triumph Tiger 1200 和 900 系列

利用您的摩托車CANbus電氣系統的靈活性和智能,使配件安裝變得極為簡便,採用全新改良的DENALI CANsmart Controller GEN II。

DENALI CANsmart Controller提供即插即用安裝和最多四個配件的整合控制,啟用數十種可自訂設置,您可以直接從手控或CANsmart配件管理軟體控制。

CANsmart的四個迴路預先編程,可連接並獨立控制兩組DENALI 2.0燈、SoundBomb喇叭及我們的B6輔助剎車燈。

功能特色

  • 高/低同步 - 設定輔助燈隨工廠遠光燈開關切換可程式化的高/低燈設定。
  • 開/關及調光 - 獨立控制兩組燈的開/關及亮度(白天及夜晚皆適用),直接從您的原廠車輛開關操作。
  • 燈光調制 - 設定輔助燈調制,提升您對其他駕駛的可見度。
  • 閃燈示意 - 需要引起注意嗎?快速按三次遠光燈開關,輔助燈將快速閃爍三次。
  • 轉向燈取消 - 當您開啟轉向燈時,此功能會取消相應的輔助燈,避免強力輔助燈蓋過您的轉向信號。
  • 危險警示燈反向閃爍 - 此功能讓輔助燈與危險警示燈反向閃爍,提升路邊緊急狀況的可見度。
  • 即插即用喇叭安裝 - 快速輕鬆連接高功率後裝喇叭,如SoundBomb,無需額外線束或繼電器。
  • 喇叭閃爍 - 選擇此功能時,CANsmart軟體會在您按喇叭時自動讓輔助燈閃爍。此功能適用於原廠喇叭或SoundBomb喇叭。
  • 減速啟動「智慧剎車」技術 - CANsmart即時讀取車速,在您踩剎車前於減速時啟動輔助剎車燈。您可調整靈敏度及啟動智慧剎車功能的最低速度。
  • 剎車閃爍模式 - CANsmart™提供四種不同閃爍模式,使我們超亮輔助剎車燈更易被後方駕駛注意。您可設定輔助剎車燈僅在急剎時閃爍、持續剎車時閃爍,或快速閃爍四次後保持恆亮(符合加州法規閃爍頻率)。
  • 迴路功能選擇器 - CANsmart軟體中的迴路功能選擇器讓您可在四個迴路中任意選擇配件。點擊迴路圖示開啟下拉選單,從可用功能列表中選擇。
  • 切換電源來源 - CANsmart™提供通用「配件」選項,提供乾淨的切換12V電源。這表示連接此迴路的配件會隨點火開關開啟或關閉。
  • 延遲關閉時間 - 您也可以設定此迴路的配件延遲關閉,讓它們在您關閉車輛後持續供電最多30秒。
  • 車載電源 - 「配件」迴路選項非常適合為您的GPS、手機、加熱裝備或其他電子設備供電。

包裝內容

  • CANsmart控制器
  • (x2) 5.5英尺燈光延長線
  • 5英尺SoundBomb喇叭延長線
  • B6剎車燈接線轉接器
  • CAN bus連接分接線
  • 束線帶
  • 黏性魔鬼氈固定帶
  • Micro USB程式編輯線

軟體

點擊 這裡 下載CANsmart配件管理軟體

    適用車型

    • Triumph Tiger 1200 GT                    (2022 - 2023)
    • Triumph Tiger 1200 GT PRO            (2022 - 2023)
    • Triumph Tiger 1200 GT Explorer      (2022 - 2023)
    • Triumph Tiger 900 GT                      (2020 - 2023)
    • Triumph Tiger 900 GT LOW             (2020 - 2023)
    • Triumph Tiger 900 GT PRO              (2020 - 2023)
    • Triumph Tiger 900 RALLY                 (2020 - 2023)
    • Triumph Tiger 900 RALLY PRO         (2020 - 2023)


    說明書下載

     

    *Tiger 900 限制事項:

    由於Tiger 900原廠線束差異,適用以下限制:

    • 無日夜亮度區分(適用於Aux1及Aux2燈路),因此無法進行日間調制。
    • 剎車燈功能需KILL開關處於RUN位置。
    • 變體: Default Title
    • 存貨單位: DNL.WHS.24600
    • UPC : 810005873970
    • 重量: 1.27 lb
    • 產品類別: 配件管理

    Questions & Answers

    >

    Customer Reviews

    Customer Reviews

    Overall rating: 4.8 / 5 from 16 reviews.

    Customer video review of CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    Excellent product. Plug and play with full programability. I have already noticed that I am much more visible on the road with my Tiger 900 GT. If you are considering this product, think no more just buy it. You will not be dissatisfied. Ride on !!

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    Customer photo review of CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    I've been a long time customer of Denali products and this is my first experience with a CANsmart Controller. Like all of Denali products, the installation was super easy and clean. I have D3 Spots paired on one channel and D3 Fogs on separate circuits to match with the turn signals. The final channel is dedicated to the B6 stop lights. Configuration was intuitive and easy.

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    The BIGGEST hurdle to this CANsmart controller install was the CANsmart Accessory Manager app. After the download, this app would not load on my Microsoft Surface (Windows 11) laptop. It wasn't until I used the Windows 10 Compatibility Mode that the CANsmart app finally loaded and I was able to connect and control the CANsmart controller. I have no clue as to why. Otherwise, I installed the CANsmart controller on my Tiger 900 RP to "grow into". Currently I connected my GPS device to the CANsmart, primarily to provide a switched power source, and I'm looking forward to adding D7 Pro Multibeam pods and rear T3-S smart tail lights.

    CANsmart™ Controller for Triumph Tiger 1200 and 900 Series

    Made install a breeze!! I didn't know that I needed it at the time I placed my order. I've been a bagger rider for 40 + years. My Triumph tiger is a big change for me and the Denali team is making it easy for this old dog to learn a new trick!! Thanks for all the great advice!!

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    Stupid simple install on my '23 900 GT. So far I have a set of S4's, and a B6 hooked up. All work as indicated. Love the dim up/down on the S4's. Dont have a computer to do fine tuning on the unit, but its really not needed as Denali has the defaults right where I'd want them. Next to install is the Soundbomb horn and that should do it.

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series

    Feels really well made. Wires feel well protected and are potted as they exit the body of the device. Install was easy, except for finding room for all the wires. Easy enough to program, though I thought I'd have ability to set timer to allow bike to run a bit before supplying voltage. Not able to do that for my GPS.

    CANsmart™ Controller GEN II - Triumph Tiger 1200 and 900 Series